Ham Helper 2.1 by AWR Software

This program is a handy tool for Ham Radio operators.  

Installation:
Just run the file hhlprXX.exe (where XX is a version number.)
This is a self-installing file.

If you are upgrading:
Do the same as above.  Ham Helper keeps track of all
info in the Windows registry, and will keep track
of all your settings and your registration.





Quick Start:

*****  UTC Time display:
        On the main window, UTC time is displayed next
        to your local time. The UTC time is also 
	displayed on the program's task bar entry, so
	it is always available quickly.

*****  Country Database:
        Enter a callsign or prefix and get info on what
        country that call is from.  There is also info on
        that country's UTC offset, lat. and long., CQ and
        ITU zones, etc.

*****  W1AW Schedule:
        Find out what time W1AW, the American Radio
        Relay League (ARRL)'s headquarter station,
        is going to be transmitting bulletins or code 
        practice.

*****  Band Plans:
        Make sure you're in the right frequency!!!  
        Find out what modes and on what frequency 
        you are allowed to operate on.  

*****  Q-Signals:
        Here you can lookup what Q-Signals mean.  These 
        are used for abbreviating on Morse code.

*****  Scrap Book:
        This was meant to take the place of paper for your
        notes.  You can easily type in what you're hearing
        on the radio.  Also, you can access the country 
        database from the Scrap Book by right-clicking.  If
        you have a word highlighted then it will lookup 
        that word, otherwise it will lookup whatever word 
        the cursor is in.

*****   ID Timer:
	 Click the ID Timer button to display the timer and
         controls.  Use this to make sure you are following 
	 10 minute identification rule.

*****   WWV Alert:
         At 15 minutes after the hour, you can have Ham 
         Helper give you an alert to tune to WWV and get 
         the latest solar conditions report.  You can use 
         these reports to see how the bands are doing.

       


email: support@awrsoftware.com
web site: www.awrsoftware.com

You can always find the latest version of Ham Helper at
	www.awrsoftware.com/hamhelper/

