===============================================================================

	AirCapture v1.01 DEMO version

		by Layer Co., Ltd.

===============================================================================

August, 2003


Thank you for downloading AirCapture DEMO version.
AirCapture is a capturing tool on wireless network environment.

---Note---
AirCapture DOES NOT support 802.11a/g wireless network adapters.
Some 802.11b adapters may not capture packets.
If your 802.11b adapter does not work properly, please report us at support@pacscope.com


1.  System Requirements
*OS: Windows 2000/XP
       The program does not operate in Windows 95/98/Me
*CPU: Pentium/Celeron 300 or faster recommended
*Memory: 128MB or more recommended
*Network Interface Card: 802.11b wireless network interface card required

<For laptop computer users>
Check power management settings of your system 
not to fall into [System standby] or [System hibernates] during capturing.
AirCapture can not capture any packets while the computer is in [System standby] or [System hibernates]. 

2.  Key features
* Captures wireless packets on the network or wireless environment
* Decodes captured packets and analyzes channel, MAC frame, BSSID, 
   source and destination MAC address, and source and destination, 
   network address of captured packets
* Filters only selected packets with assigned filter conditions by a user 
* Monitors packets and traffic by a number of packets, KBytes, or errors  
* Displays signal strength and normal packets ratio graphically
* Saves and prints captured packets information
* Exports in CSV, TXT, or PRN format
and more.

3.  Limitation for DEMO version
AirCapture is a shareware (not free software).  
You may use AirCapture [DEMO version] for evaluation purposes 
for a period 30 days without registration.
If you wish to use AirCapture after the 30-day evaluation period,
the purchase of registered license with payment is required.
The following limitations may apply [DEMO version] of AirCapture.
* Capturing time is limited for 10 seconds
* Capturing is restricted after 10 minutes of program running
* WEP key decoding is unabled
* Captured packets can not be saved
* Captured packets can not be printed
* Gathering network information is limited for 10 minutes

4.  Installing AirCapture
Simply double-click Setup.exe and follow the Installer through the rest of installation process.
To use AirCapture, Layer's Capture Driver must be installed and enabled.
Use Capture Driver Utility program provided with AirCapture to install the capture driver.

***Attention***
You may not use network connection, including Internet connection, while Layer's Capture Driver is enabled. 
To enable network connection, exit AirCapture then restore manufacturer's original device driver by using Capture Driver Utility.

5.  Registration
Your downloaded program is a DEMO version.
If you wish to use full functions of AirCapture without limitations, 
you need to pay applicable license fee then you will be allowed to download a full version product and received your license number.
<Procedure>
1)  Visit purchase section of our website at
    http://www.pacscope.com/pacs/purchase.html
2)  Choose your preferred payment method and process to pay.
3)  After the completion of your payment, you will be received download 
    information to obtain a full version of AirCapture and your license number
    via e-mail usually within 48 hours.

If you have any question, send e-mail to: info@pacscope.com
or visit our website at:  http://www.pacscope.com

<Doc Rev.00003>

