  DeskMate 3.5 VGA Driver

The DMVEVGA.RES driver file enables the user to run DeskMate version
3.05 on a system which has a VGA monitor.

This disk contains the following files--

   DMVEVGA.RES      
   README.TXT


In order to obtain a printout of this README.TXT file, insert this
disk in Drive A, make sure your printer is switched on, is on line,
and at the C:\> prompt, type in the following command--

   PRINT A:README.TXT

and press <Enter>.


INSTALLATION

1.  Start up your computer.

2.  Insert this diskette in Drive A.

3.  At the C:\> prompt, type in

       CD \DESKMATE

    and press <Enter>.

NOTE: In the above CD command, DESKMATE is the name of the DeskMate
      directory on your system. If the name of the DeskMate directory
      is not DESKMATE, substitute the appropriate name in the place
      of DESKMATE in this CD command line.

4.  Type in

       COPY A:DMP*.*

    and press <Enter>.. The driver file from this disk is copied
    to the DeskMate directory on your hard drive. DeskMate should
    now work with a VGA monitor.


NOTE:
"While reasonable efforts have been taken in the preparation of this
information to assure its accuracy, Tandy Corporation/Radio Shack
assumes no liability resulting from the use of the information
contained herein."
