Actiontec Electronics Inc.
CameraConnect Pro PC805 Driver Update
Driver Release 1.20
July 20, 1999


=========================================================================

Follow the procedures in this README.TXT file if you have any version
of the CameraConnect Pro drivers installed. They must be removed before
installing the 1.20 drivers.

=========================================================================


This file contains instructions for installing the 1.20 drivers for the
CameraConnect Pro.


README.TXT CONTENTS
========
   1) Overview
   2) Uninstalling old CameraConnect Pro drivers
   3) Installing CameraConnect Pro 1.20 drivers
   4) Installation Problems
   

1) Overview
   ============
   This archive, CCPRO120.EXE contains new drivers for the CameraConnect
   PC805
   Included are: 
   - CCPV120.EXE (CameraConnectPro 1.20 drivers)
   - README.TXT (This readme.txt)


2) Uninstalling old CameraConnect Pro drivers
   ==============================================
   1. Follow the steps in Appendix B: Uninstalling the CameraConnect Pro
      in the printed manual, or from the PC805.PDF file available on the
      Actiontec website.
   2. Reboot the computer.
   3. After the reboot, proceed to Section 3.
   

3) Installing CameraConnect Pro 1.20 drivers
   =============================================
   1. Run the CameraConnect.exe file. This begins the installation of
      the 1.20 Beta 2 drivers. Follow all prompts for installation.
      
4) Installation Problems
   =========================
   1. If the installation is unsuccessful, contact Technical Support.
   

=========================================================================