
		  Installing the DiskOnChip 2000
		  ------------------------------
			for Windows NT 4.0
			------------------

                             Sep-97


	I. Installing DiskOnChip 2000 as additional drive
	   in your system.

 To work with the DiskOnChip 2000 on Windows NT 4.0, TrueFFS for
 Windows NT must be installed. The following will guide you in this
 process.

 1. Insert the disk with TrueFFS installation files into a drive.
 2. From the Windows NT display, open "My Computer" on your
    desktop or open the Windows NT Explorer.
 3. Open the disk with TrueFFS installation files.
 4. Click with the right mouse button on the file Trueffs.inf.
    You will see a menu.
 5. In the menu choose "Install" and click on it.
 6. After Windows NT finishes copying the driver you will be
    asked to reboot your computer. After rebooting, the
    DiskOnChip 2000 will appear as another drive in your system.


	II. How to format DiskOnChip2000 with NTFS, compress it
	    and make it bootable on Windows NT 4.0

 Assuming you already have DiskOnChip2000 working in your system as
 additional drive:

 1. Create a Windows NT 4.0 installation to be copied to the
    DiskOnChip 2000. You may use VenturCom Component Integrator
    to create a small footprint installation (see below more details).
 2. Open Explorer, go to DiskOnChip2000 drive and press right button on
    the mouse, then choose "Format" from the menu.
 3. Choose NTFS in "File System", Do NOT enable compression, press
    "Start". Press "Close" when formatting is finished.
 4. Go to the drive and create new folder with the name "Winnt".
    Right-click on this folder and choose "Properties" from the menu.
 5. Check "Compress" and press "Ok". You will be given another
    screen with exclamation point warning that this action compresses
    all files but does not compress subfolders. Check "Also compress
    subfolders" and click "Ok".
 6. Now copy all the files from your Windows NT 4.0 installation to
    the drive. You should copy all files from \Winnt directory to 
    the just created \Winnt directory on the DiskOnChip2000 drive. Copy
    all files that should be in the root to the root of the DiskOnChip2000
    drive. Do NOT compress files in the root directory! The following
    files must reside in the root directory for Windows NT to boot:
    NTLDR, NTDETECT.COM, BOOT.INI and BOOTSECT.DOS.
 7. DiskOnChip2000 is ready to boot Windows NT. If you want to boot it
    in the system you just used, you need to disable your hard disk drive
    in the BIOS Setup or to disconnect it thus letting the DiskOnChip2000
    be a boot device instead of your hard disk.


	III. Using the VenturCom Component Integrator to prepare
	     small footprint Windows NT 4.0

    To add TrueFFS driver to the Component Integrator you will have to
    import a TrueFFS kit (TrueFFS driver and TrueFFS kit definition file) .

    1. Go to the disk with TrueFFS installation files and find
       Trueffs.kdf file. Open this file with any text editor,
       for example, Notepad. You should change the "Repository"
       parameter in the [Header] section and the "1" parameter
       in the [SourceMedia] section to the drive letter of
       the disk with TrueFFS installation files. You should
       also change the "1" parameter in the [Directories] section
       to the actual location of the TrueFFS installation files.
    2. Open Component Integrator, go to "Workspace" menu,
       choose "Kit Import". Click "Add" and open Trueffs.kdf
       file. Click "Ok" after processing is finished.
    3. Go to your configuration of Windows NT in the Component
       Integrator, open "System" - "Disk Storage" - "Disks",
       click twice on "TrueFFS", check "Add Component" and
       press "Ok".
    4. Build your configuration. It will include DiskOnChip 2000
       support now.


 TrueFFS is a registered trade mark of M-Systems Ltd.
 The TrueFFS software is protected by US Patent no. 5404485.
 All other trade marks, service marks, trade names are the
 property of their respective owners.

 Corporate Headquarters        North American Headquarters

 M-Systems Ltd.                M-Systems Inc.
 Atidim Industrial Park        39899 Ballentine Drive
 P.O.B. 58036                  Suite 335
 Tel-Aviv 61580 	       Newark, CA 94560
 Israel                        USA

 Tel: +972-3-647-7776	       Tel: (510) 413-5950
 Fax: +972-3-647-6668	       Fax: (510) 413-5980
 E-mail: info@m-sys.com
 http://www.m-sys.com
