
              **************************************************
              Example for PLANET RT-101 LAN-to-LAN configuration
              **************************************************

This example file is only for reference, the parameter of it may different
with your LAN/LAN and modem configuration.



The configuraton for LAN A

                         [ Basic configuration ]               Version 1.2

    Local IP address: 172.168.4.1
    Local network mask: 255.255.0.0
    Remote IP address: 192.168.6.1
    Remote network mask: 255.255.255.0
   >IP broadcast address: 172.168.255.255
    User ID: LANA
    Password:****
    Line type: Dial up line
    Baud rate:  38400 bps
    Phone number: 3571058
    Disconnect link if inactive for more than 15  minutes.
    Modem AT commands:
       Intial string: AT&F2E0V1Q0W1S95=47S0=0S7=60S30=0LM1&Q5\N3%C3&K3
       Answer on string: ATS0=1
       Answer off string: ATS0=0
       Hang-Up string: ~~~+++~~~ATH0
       Dial Prefix string: ATDT
    [Advanced settings]
    Save and reset device
----------------------------------------------------------------------------------------------------------
 ESC - Back to Main Menu, TAB - Change field, ENTER - Select


                         [ Advanced settings]
  Serial Port:
     >UDP checksum: Yes
      Periodic RIP: Yes
      Generate zero fill (BSD 4.2) broadcast address: No
      Use ethernet IP address and network mask: Yes
      IP address: 0.0.0.0
      Network mask: 0.0.0.0
  LAN MTU: 1500
  WAN MTU: 576
  LAN-to-LAN: Yes
     Security: PAP
     User ID: LANB
     Password: ****
     Default gateway: 192.168.6.1
  PPP Link:
      Connect-tries: 0  Tries
      Delay between two tries: 1  Minutes
  [Change console password]
----------------------------------------------------------------------------------------------------------
 ESC - Back to Main Menu, TAB - Change field, ENTER - Select




The configuraton for LAN B

                         [ Basic configuration ]               Version 1.2

    Local IP address: 192.168.6.1
    Local network mask: 255.255.255.0
    Remote IP address: 172.168.4.1
    Remote network mask: 255.255.0.0
   >IP broadcast address: 192.168.6.255
    User ID: LANB
    Password: ****
    Line type: Dial up line
    Baud rate:  38400 bps
    Phone number: 3758300
    Disconnect link if inactive for more than 15  minutes.
    Modem AT commands:
       Intial string: AT&FES7=60S30=0L0M1\N3%C1\Q3B%G1X
       Answer on string: ATS0=1
       Answer off string: ATS0=0
       Hang-Up string: ~~~+++~~~ATH0
       Dial Prefix string: ATDT
    [Advanced settings]
    Save and reset device
----------------------------------------------------------------------------------------------------------
 ESC - Back to Main Menu, TAB - Change field, ENTER - Select


                         [ Advanced settings]
  Serial Port:
     >UDP checksum: Yes
      Periodic RIP: Yes
      Generate zero fill (BSD 4.2) broadcast address: No
      Use ethernet IP address and network mask: Yes
      IP address: 0.0.0.0
      Network mask: 0.0.0.0
  LAN MTU: 576
  WAN MTU: 576
  LAN-to-LAN: Yes
     Security: PAP
     User ID: LANA
     Password: ****
     Default gateway: 172.168.4.1
  PPP Link:
      Connect-tries: 0  Tries
      Delay between two tries: 1  Minutes
  [Change console password]
----------------------------------------------------------------------------------------------------------
 ESC - Back to Main Menu, TAB - Change field, ENTER - Select

